If you’ve ever used a glue-free adhesive pad, you’ve probably noticed how it tends to be difficult to apply, and often not always durable enough to last you a long time.

We’re here to help you overcome these challenges with a tutorial.

The first thing you need to do is create a template.

Make sure to get a template template from an online template shop or craft store.

This will be a handy reference to make sure your project is well-suited for each layer.

Next, create a mold.

This is where you will make your first batch of glue-less glue, which we’ll call our mold.

You can make your own or use a premade template from a local hardware store.

We recommend making a mold that’s 2 inches by 2 inches and has a hole in the center, because you want to make a good seal between the layers.

To make the mold, you’ll need a glue bottle.

You will also need a ruler, a pen and some paint.

Paint a hole where you want the mold to go, then fill it with glue.

Now, lay down a layer of the glue and set it on top of the layer of paint.

You’ll want to keep the glue in the same place for each new layer.

Now we need to paint the mold.

Paint paint over the surface of the mold so that it looks nice.

Paint the hole in one of the corners.

You should paint the entire surface of this hole black, as well.

Now paint over each corner again.

Next layer paint the hole and then paint over it again.

Finally, paint over all the holes.

Now you have a fully painted, glue-covered mold!

You can use your favorite paint to add a few layers of paint, but we’ve used a paintbrush to paint our mold as well as the paint we used for the glue.

Paint your entire project with your favorite color, then let it dry.

We hope you enjoy this tutorial as much as we did.